1L 2L Chemical Jacketed Glass Reactor With Double Layer

  • glass reactor

Voltage:110V/220V Power(W):40W Dimension(L*W*H):560x58x150cm Weight:12kgs Certification:ISO9001 and CE Warranty:one year After-sales Service Provided:Overseas third-party support available Vacuum degree(Mpa):-0.098 Reaction flask(L):3 Rotation speed(Rpm):0-1300 Stirring shaft diameter(mm):10 Motor power(W):40 Voltage(V):220/50 Size(CM):60x58x150

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest

1L 2L Chemical Jacketed Glass Reactor With Double Layer

Product description


TL series Jacketed glass reactor is used in pharmaceutical and chemicals as well as Research institute, it is requisite tool for distillation and reflux,etc.

Now we can manufacture 1L jacketed glass reactor to max capacity 150L jacketed glass reactor,

From 1L to 10L’s jacketed glass reactor, its structure is flat base, the material is 304 stainless steel or 316L or PTFE coated

Now we will recommend our Attributes and specifications of 1L to 10L’s Jacketed Glass Reactor:

The Attributes

  1. It is with standard 304 stainless steel, it can resist acid and alkali.


  1. Jacketed vessel is with material high borosilicate glass, can reach to max temperature 300degree, min temperature -80degree(tested by technician), but we need to clarify that we only suggest to use max temperature 250degree, because of it has PTFE valve and PTFE sealing,etc.


  1. Bottom Discharging valve: it has two kinds respective for side discharging and non- side discharging valve(straight down discharging), the side discharging valve is easy to connect with other afiliated equipment(for example:the another reactor with same function, or getting samples easily,etc); as for non-side discharging valve, it is with same function with side discharging valve, and with 100% PTFE material


  1. Jacketed Vessel, the inner wall is 6mm,the outer wall is 8mm. The active pressure is with 0.2Mpa(about 2KGS),the negative pressure is with -0.098Mpa, the inner wall was connected with outer wall by high temperature,no faulty, no blowhole(our technician needs to do test experiment excluding faulty).


  1. Reactor lid, it has standard 5 necks: the middle is the stirring port with flange,the stirring sealing is PTFE sleeve with bearing, and with a mechanical spring tapersleeve, it can be kept in good sealing condition when it is doing stirring reaction. The left is the dropping funnel,the right is condenser(optional: glass bend with collecting flask 0.25L or 500ml), the rear is multi-function port(air inlet or charging function or outgassing or vaccum supplying).the front is the temperature port with glass thermowell. According to customer request, still we can add a big charging port with 50mm(PTFE cover keeps seal).


  1. The motor is no brush,and no spark,low noise,adjustable speed of frequency convertor (optional:ex-proof motor).And the controller has speed and temperature’s display.


Tec parameters

Type TL-1L TL-2L TL-3L TL-5L TL-10L
Vacuum degree(Mpa) -0.098 -0.098 -0.098 -0.098 -0.098
Reaction flask(L) 1 2 3 5 10
Rotation speed(Rpm) 0-1300 0-1300 0-1300 0-1300 0-500
Stirring shaft diameter(mm) 10 10 10 10 12
Motor power(W) 40 40 40 90 90
Voltage(V) 220/50 220/50 220/50 220/50 220/50
Size(CM) 55x55x120 55x55x130 60x58x150 65x60x160 65x50x200


               Basic standard components
(1): TL1-FC-307: Frequency-convertor for digital display 1
(2): TL1-10: Condenser 1
(3): TL1-11: Electric Stirrer motor  power: 90W. 1
(4): TL1-21: Lock Clamp 1
(5): TL1: Charging Pipe 1
(6):TL1-1: half-ring Clamp 1
(7) TL1-021: black lock clamp 1
(8) TL1-2: discharging Switch 1
(9) TL1-99-16: 4 Neck Lid 1
(10)TL1-0 Screw 14
(11)TL1-RH-208 Lock Clamp “O” 2
(12)TL1-5: support rod 4
(13) TL1-RH-210 Support Ring “O” 2
(14) TL1-JR-111 3L Jacketed vessel 1
(15)TL1-ST-101 Stirrer Shaft Stainless Teflon agitator 1
(16)TL1-RH Lock 4
(17)TL1-DS-158 Discharging Valve  not existing materials 1
(18)TL1-4 Main support rod 1
(19)TL1-3 Flat Base 1








Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest

Leave a Reply

Your email address will not be published. Required fields are marked *