Voltage:220V/50HZ Power(W):1.5 kw Dimension(L*W*H):620*650*860mm Weight:100 kg Capacity:0.05-10L Setting Pressure:22 Mpa Stirring Speed:50-1000 rpm Stirring Torque:120 N.cm Setting Temperature:350℃ Heating Power:1.5 kw Temp. Control Accuracy:±1 ℃ Heating Method:Electric , Oil , Steam Material:1Gr18Ni9Ti Model:CJF Series
series lab magnetic stirred autoclave is a stirring and reacting device, which is used for kinds of chemical materials which are Gas-liquid, liquid-liquid, liquid -solid or gas-liquid-solid three-phase to reactand stir fully under the high pressure, vacuum, high temperature, up to strength mass and heat transfer process. Static sealing structure, Magnetic coupling connection between the agitator and motor drive. Static seal instead of dynamic seals, and thoroughly mixing exchange leakage, the entire media and mixing the components to work completely in the state of absolute seal.
|Setting Pressure (Mpa)||≤22|
|Setting Temperature (℃)||≤350|
|Accuracy of Temperature Control (℃)||±1|
|Heating Method||General electric heating, the others are far-infrared,
thermal oil, steam, circulating water, etc
|Heating Power (W)||600|
|Stirring Speed (R/min)||0-1000|
|Stirring Torque (N.cm)||120|
|Motor Power (W)||80|
|Temperature Controller||Real~time display and adjust the speed,
heating voltage, with
standard PID automatic
temperature adjustment meter.
|Working Environment||Ambient temperature 0-50℃,
Relative humidity 30-80%
|Lifting Mode||CJF-no lift, FCF-manual lift or electric lift|
|Material||304/316 Stainless steel, Titanium,
also can plus PTFE liner
1.Static sealing structure.
2. The mixer bath electrical machinery transmission uses the magnetic force couple connection.
3. No-touch passing moment, solving the stirred leak problem.
4. Medium and the stirring member is in sealing state to work.
5. Cooling function is also available.
6. We can also add another discharge valve according to your requirements.
7. Safety valve is also optional.
8. We can also customize big volume according to your needs.
|Setting pressure (Mpa)||22|
|Setting temperature (°c)||350|
|Temperature accuracy (°c)||±1|
|Stirring torque (N.cm)||120|
|Heating power (KW)||0.6||0.6||0.8||1.5||1.5||2||2.5||4||7|